The Chambers Global Practice Guide: Product Liability & Safety (2019), Law and Practice chapter is published here with permission.
1. Product Safety
1.1 Legal Framework
The main laws and regulations governing product safety in the United States include:
1.2 Regulatory Authorities
The main U.S. agencies regulating product safety are the FDA, the CPSC and the NHTSA. Agency authority to regulate products is defined by statute.
The FDA is responsible for safeguarding and advancing public health. It regulates food; drugs; medical devices; radiation-emitting products; vaccines, blood and biologics; animal and veterinary; cosmetics; and tobacco products. The FDA’s authority is defined by the FDCA, which authorises the FDA to regulate drug safety, issue food-safety standards, and inspect factories.
The CPSC regulates over 15,000 consumer products to prevent unreasonable risk of injury or death. Its authority is outlined by the CPSA, which authorises the CPSC to develop safety standards and initiate product recalls and bans.
The NHTSA enforces Federal Motor Vehicle Safety Standards for vehicles and component parts. The NHTSA regulates vehicle and highway safety to reduce deaths, injuries and motor-vehicle accident costs. The NHTSA’s scope of power is found in the National Traffic and Motor Vehicle Safety Act, which authorises the NHTSA to issue safety standards and recall vehicles and component parts.
1.3 Corrective Actions
The FDA, CPSC and NHTSA can request or require corrective action, including removing a product from market - known as a recall. The standards governing manufacturers’ obligations to commence the recall process vary by agency.
The FDA recalls involve correction or removal. There are three types of FDA recalls, based on the potential danger posed by a defective or potentially harmful product: Class I for products that predictably could cause serious harm; Class II for products that might cause harm; and Class III for products unlikely to cause harm. Most recalls are voluntary, but the FDA can request recalls. If a company concludes that a recall is necessary, it will notify the FDA that it intends to implement a recall and will propose a recall plan. The FDA supervises a company’s recall strategy and effectiveness, and examines whether the company has made reasonable efforts to remove or fix the product (eg, by providing enhanced warnings or making repairs or adjustments). The FDA issues a weekly recall report and may publicise recalls to inform the public.
When the CPSC receives a report that a product is defective, poses harms or fails to comply with safety standards, as required by the CPSA section 15, it classifies the danger as follows: a Class A Hazard exists when death or grievous injury is likely or very likely, or serious injury is very likely; a Class B Hazard exists when death or grievous injury is possible, serious injury is likely, or moderate injury is very likely; and a Class C Hazard exists when serious or moderate injury is possible. Each class requires corrective action, such as a recall to recover, repair or replace the product. After the CPSC and the company agree to a recall, they work together to develop an implementation plan for the recall and to monitor the company’s efforts. As part of the recall process, companies must inform the public so consumers can act accordingly. Public notice may include press releases, information on the company’s website or social media, or advertisements, among other methods. When the company believes the recall has been successfully implemented, it can request that the recall no longer be monitored. Other remedial actions ("corrective action plans") include returning the product for a refund, repairing the product, or notifying the public of the hazard. The CPSC has a Fast Track Product Recall Program that permits expedited recalls if, among other criteria, the company can implement a recall or corrective action within 20 days of submitting its report to the CPSC. The benefit of the programme is that the CPSC will not make a finding that the product is defective.
If the NHTSA receives multiple complaints about a product, it may investigate whether a defect exists or a recall should be recommended. A recall is issued when a vehicle or product poses an unreasonable safety risk. If a recall is issued, the company must inform owners within 60 days. The company must provide a free remedy, such as repairing, replacing, refunding or repurchasing the vehicle or product. Most recalls are voluntary, but the NHTSA can require a recall.
1.4 Notification to Regulatory Authorities
The triggers for reporting product safety issues to regulating authorities vary by agency. Some reporting is risk-based; some is incident-based.
The FDA has different reporting requirements for different products. For example, for pharmaceutical products, drug, biologic and device manufacturers; device importers; and certain health care facilities must report adverse events or product problems via Form FDA 3500A or in electronic form. Specifically, if a drug or biologic manufacturer learns of a serious adverse event associated with its product, such as death, disability or life-threatening injury, it must inform the FDA within 15 days of receiving the information. 21 C.F.R. §§ 310.305, 314.80, 600.80. Under the Medical Device Reporting regulations (Code of Federal Regulations, Title 21, Part 803), medical device manufacturers and importers and certain health care facilities must inform the FDA of adverse events and product problems, as follows: manufacturers and importers must report to the FDA within 30 days of learning their device could have contributed to or caused serious injury or death, 21 C.F.R. §§ 803.40, 803.50; manufacturers must inform the FDA within 30 days of discovering malfunctions that could contribute to or cause serious injury or death, 21 C.F.R. § 803.5; manufacturers must sometimes report events requiring corrective action within five days, 21 C.F.R. § 803.53; health care facilities must inform the FDA within ten days if they suspect a medical device caused death, and must inform the device manufacturer or the FDA of serious injury, 21 C.F.R. § 803.30; and health care facilities must submit annual safety reports to FDA, 21 C.F.R. § 803.33. Finally, health care-providers, caregivers, patients and consumers may, but are not required to, submit voluntary reports of adverse events and product problems. These reports help the FDA monitor product safety and may prompt corrective action.
The CPSC also has mandatory risk-based and incident-based reporting requirements. Section 15 of the CPSA requires companies to report products that are defective, pose harm or fail to comply with safety standards. The Child Safety Protection Act section 102 requires companies to report choking incidents involving children. Companies must report these issues to the CPSC’s Office of Compliance and Field Operations within 24 hours of receiving reportable information. If a company is unsure whether the information is reportable, it can investigate for no more than ten working days, with some exceptions. Additionally, section 37 of the CPSA requires manufacturers to report lawsuits and settlements concerning a product within 30 days after a judgment or settlement in the last of three lawsuits involving the product.
Similarly, the NHTSA requires companies to provide risk-based and incident-based reports. For instance, an equipment or vehicle manufacturer must submit a Defect and Noncompliance Information Report to the NHTSA within five working days of concluding that the vehicle or equipment poses a danger or fails to comply with safety standards. 49 C.F.R. § 573.6. Manufacturers must also inform the NHTSA of recalls or corrective actions in foreign countries within five days of deciding to conduct the action or receiving notice from a foreign government that the action is required. 49 C.F.R. § 579.11. Under the TREAD Act and implementing regulations, manufacturers must submit early-warning reports to the NHTSA. Large manufacturers of vehicles and all tyre and child-restraint system manufacturers must report information that could indicate potential danger, such as incidents of death or injury, warranty claims, and consumer complaints. All other manufacturers must report incidents of death. Finally, manufacturers must submit copies of their communications concerning defects and other matters to the NHTSA. 49 U.S.C. § 30166(f).
1.5 Breach of Obligations
Civil and criminal penalties are available if companies breach their obligations.
The FDA can impose various civil penalties, including fines, injunctions, warning letters requesting remedial action, recalls, and seizures. Those who violate the FDCA may also face criminal penalties, including imprisonment for no longer than one year, a fine of no more than USD1,000, or both. 21 U.S.C. § 333. Second offences and other violations can result in longer prison terms and higher fines. 21 U.S.C. § 333.
Similarly, the CPSC can impose penalties. For example, it is unlawful to sell, manufacture, distribute or import consumer products subject to corrective action. 15 U.S.C. § 2068. Those engaging in this unlawful conduct (and other acts prohibited in 15 U.S.C. § 2068) are subject to civil and criminal penalties. 15 U.S.C. §§ 2069, 2070. Failure to submit mandatory reports to the CPSC also can result in civil or criminal penalties. For example, in 2018, Polaris Industries, Inc agreed to pay a civil penalty of USD27.25 million after it failed to report defects in two off-road vehicle models. As part of the settlement, the company agreed to maintain a compliance programme.
Finally, the NHTSA can impose civil and criminal penalties for vehicle safety violations and for falsifying or failing to provide required information. 49 U.S.C. §§ 30165, 30170. Civil penalties can cost up to USD21,000 per violation, with a maximum penalty of USD105 million for related violations. 49 U.S.C. § 30165. Those who violate reporting requirements with intent to mislead the NHTSA about safety issues are subject to fines, imprisonment for no longer than 15 years, or both. 49 U.S.C. § 30170. For example, TK Holdings Inc. entered a settlement with the NHTSA after it failed to file defect information reports in a timely manner; its total penalty was USD200 million.
2. Product Liability
2.1 Causes of Action and Sources of Law
Product liability is a creature of state law, and the law can vary, sometimes significantly, by state.
The main common-law causes of action are strict liability, negligence, breach of warranties, consumer protection, fraud, and negligent misrepresentation. Claims generally can be brought against a product’s manufacturer, seller, distributor or retailer. "Sellers" include everyone within the chain of commerce, including wholesalers, even if they were unaware of the defect.
Strict liability requires a showing that the product was sold in an unreasonably dangerous condition when it left the manufacturer, seller, distributor or retailer; the defect was unchanged when it reached the plaintiff; and the product’s defect injured the plaintiff. Regardless of a defendant’s intent or level of care, it can be held liable for injury. Generally, prescription drug manufacturers should not be held liable under strict liability. Restatement (Second) of Torts § 402A, cmt. k.
Negligence claims require a plaintiff to show that the defendant owed a duty of care to the plaintiff, the defendant breached that duty, the breach caused the plaintiff’s injury, and the plaintiff was injured or damaged. Negligence claims focus on the reasonableness of the defendant’s conduct and whether the manufacturer breached its duty of care. The principles below concerning causation and damages apply to negligence claims. A defendant owes a duty of reasonable care to consumers in terms of design, manufacturing and providing adequate warnings.
Breach of Warranty
Warranty claims are based on express writing, promises of performance, or implied warranties of fitness for particular purpose or merchantability. The source of law is common-law contract principles, except in the case of personal injuries.
Federal and state consumer protection laws are generally broad and protect against unfair business practices, including false or misleading advertising or labelling; misrepresentations about the quality of goods; safety violations; and anti-competitive practices. The standard of proof varies by statute, but typically plaintiffs must show intent and reliance on the misleading information to prevail.
To establish a fraud claim, plaintiffs must show that the defendants knowingly made false representations about the product to induce the plaintiff to purchase the product, the plaintiff relied on those representations when purchasing the product, and the plaintiff was damaged by those false representations. Fraud allegations provide a way for plaintiffs to seek punitive damages.
Negligent misrepresentation requires plaintiffs to show that there were false or misleading representations about the product, the defendant should have known that the information was false or misleading, the plaintiff relied on that representation, and the plaintiff was damaged by that representation. The key distinction between fraud and negligent misrepresentation is the defendant’s intent. Fraud requires intentional conduct while negligent misrepresentation only requires that the defendant made the misrepresentation carelessly or lacked reasonable grounds for believing the statement’s truth.
In some states, the common law causes of action have been replaced by a product liability statute or act. Generally, the statute will combine the common-law principles and provide a single cause of action that focuses on product defect. Product liability statutes often contain specific defences for non-manufacturer distributors or sellers and limits on damages. In Indiana, punitive damages cannot exceed three times compensatory damages or USD50,000, whichever is greater. I.C. § 34-51-3-4. In Connecticut, punitive damages cannot exceed twice the amount of damages. Conn. Gen. Stat. § 52-240b.
Defects in manufacturing, design or packaging and inadequate warnings can all give rise to liability. A manufacturing defect is where the product is different from its intended design and was defective when it left the defendant’s control. A design defect is where the overarching design of the product is defective so that all products produced under that design are defective, and where the foreseeable risks of harm could have been reduced or avoided with a reasonable alternative design. A warning defect is where the foreseeable risks of the product are not adequately disclosed, the warnings are inadequate to warn properly of the product’s danger, or the failure to warn makes the product not reasonably safe. Failure-to-warn claims can be brought as strict liability or negligence claims.
To determine whether a product is defective, states typically use the consumer expectations test, the risk utility test, or a combination of both. Under the consumer expectations test, the product is defective if it is unreasonably dangerous and that level of danger exceeds what the ordinary consumer would expect. Restatement (Second) of Torts: Product Liability § 402(a). Under the risk utility test, the product is defective if the product’s risks outweigh its utility. Restatement (Third) of Torts: Product Liability § 2(b).
There may also be instances when a manufacturer has a post-sale duty to warn. There are several approaches to determine whether this duty is triggered, and several states do not impose this duty at all. For example, under the Restatement (Third) § 10, this duty is triggered when the manufacturer knows or reasonably should know that the product poses a substantial risk of harm, those who would be warned can be identified and are likely unaware of the risk, the warning can be communicated and acted upon, and the risk of harm is substantially great to justify the burden of providing the warning. Another approach is the reasonable person standard, which weighs how reasonable it would be to provide the warning. This approach considers factors such as the product type, nature of harm that would occur without the warning, economic burden on the manufacturer, and the likelihood that harm would occur.
Liability also requires a finding that the defect was the "cause" or "proximate cause" of an injury. Causation is expressed in terms of whether "but for" the defect the injury would not have occurred. Proximate cause focuses on whether the chain of events leading to the injury are "too remote" from the defect. If the injury is too remote or indirectly related to the defect, the defendant cannot be held liable. The precise formulation for causation varies by state.
2.2 Legal Standing to Bring Claims
The individual alleging injury will have standing to bring a product liability claim. The original purchaser is not the only one with standing; anyone who used the product in a way that was foreseeable can sue if injured. For breach-of-warranty claims, courts typically require privity of contract for standing, meaning that only an individual who was a party to the agreement can bring the suit, unless there are personal injuries. In most states, breach of express or implied warranty claims can be brought by third-party beneficiaries, ie, intended recipients of a contract’s benefits who are not parties to the agreement. UCC § 2-318; Greenman v. Yuba Power Products, Inc., 377 P.2d 897 (Ca. 1963).
A spouse, and in some jurisdictions, children, will have standing to bring a loss of consortium (loss of care and comfort) claim. There are also wrongful death and survivor statutes that define when heirs can bring actions in a deceased’s name. There are also limited circumstances when individuals in the "zone of danger" of an injury may bring emotional distress claims. Under the zone of danger rule, plaintiffs who were not injured can recover for emotional distress if they witnessed another person being injured and they were within the zone of physical danger.
2.3 Time Limits for Claims
Depending on the cause of action and jurisdiction, the statute of limitations can range from one to six years to bring an action. Some jurisdictions do not have a specific statute of limitations for product liability actions, so the time limits for torts or civil actions apply.
Generally, the statute of limitations begins to run when the injured party becomes aware of the injury. In some states, the clock begins to run at the time of injury. However, most states have adopted the discovery rule. This means the statute of limitations will not begin to run until the plaintiff discovers, or should have discovered, the injury, cause and/or wrongful conduct of the defendant. If, through reasonable diligence, a plaintiff should have discovered the injury on a certain date, that is the date the clock will begin to run. If a plaintiff is unreasonably delayed in discovering the injury, he or she cannot toll the statute of limitations to the date of discovery.
Different states have different requirements for the discovery rule. Most states fit into one of three categories. A large number of states require plaintiffs to discover the injury and cause for the statute to run. In a small number of states, it will begin to run only when plaintiffs discover the injury. Other states require plaintiffs to discover the cause of action, which usually means discovering all essential facts to prove each element of the cause of action.
For example, in Alaska, the discovery rule tolls the statute of limitations "until the claimant discovers, or reasonably should have discovered, the existence of all elements essential to the cause of action." Jarvill v. Porky’s Equip., Inc., 189 P.3d 335, 339-340 (Alaska 2008). In Mississippi, however, the cause of action begins to accrue when plaintiffs knew or should have known of the injury. PPG Architectural Finishes, Inc. v. Lowery, 909 So.2d 47, 50 (Miss. 2005) (citing Miss. Code § 15-1-49).
2.4 Requirements to Invoke Jurisdiction
For a plaintiff to maintain a suit over the defendant, the court in which the suit is brought must have personal jurisdiction over the defendant. A court has general jurisdiction to hear all claims over a party where it is incorporated or has its principal place of business. Specific jurisdiction only allows a court to hear a particular case against a party. Bristol-Myers Squibb Co. v. Superior Court of California, 137 S. Ct. 1773 (2017) clarified the scope of specific jurisdiction. There, a group of plaintiffs (some from California and some from other states) sued a defendant corporation incorporated in Delaware and headquartered in New York. The Court found the defendant’s relationship with a third party (a California company distributing the defendant’s product nationwide) was insufficient to establish specific jurisdiction over the non-resident plaintiffs’ claims, noting specific jurisdiction requires more than a general connection with the forum; rather, it requires "an affiliation between the forum and the underlying controversy, principally, [an] activity or an occurrence that takes place in the forum State." Id. at 1781 (citation and quotations omitted). Given this clarified standard, multi-plaintiff product actions face jurisdictional hurdles. Indeed, in BMS, the Court observed that resident and non-resident plaintiffs can only join in a consolidated action in a state with general jurisdiction over a defendant. In the absence of that general jurisdiction finding, individual plaintiffs would likely be required to bring claims in their own states of residency. This prevents plaintiffs’ lawyers from filing multi-plaintiff claims in plaintiff-friendly states, even if those plaintiffs have no connection to the state.
Federal courts have jurisdiction over "federal question" cases involving civil actions under the U.S. Constitution, federal laws or treaties. 28 U.S.C. § 1331. Federal courts also have "diversity jurisdiction" when the parties are diverse citizens (every plaintiff is from a different state or foreign country than every defendant) and the amount in controversy exceeds USD75,000. 28 U.S.C. § 1332(d).
Federal courts are available for certain class or mass actions that involve more than 100 plaintiffs or over USD5 million in damages under the Class Action Fairness Act (CAFA). 28 U.S.C. § 1332(d). Under CAFA, there must be minimal diversity, meaning that at least one member of the class is diverse from one defendant. There are two exceptions to CAFA that require the case to be heard in state court: the home state exception and the local controversy exception. The home state exception is where at least two thirds of class members and the primary defendants are citizens of the state where the action was filed originally. The local controversy exception applies if at least two thirds of class members and at least one defendant are citizens of the state where the action was originally filed, the alleged harm occurred in that state, significant relief is sought from a local defendant whose conduct forms a significant basis for the claims, and no other class action was filed in the past three years by the same parties. If the federal jurisdiction prerequisites are not met, claims must be brought in the state court that has jurisdiction.
2.5 Pre-action Procedures and Requirements
There are generally no requirements for pre-action procedures. If plaintiffs bring product liability claims with professional negligence claims (such as medical malpractice), some states will require the plaintiff to secure an expert certification of merit or proceed through an administrative process before bringing the professional negligence claim. Failure to complete pre-action steps can lead to dismissal of the complaint until the steps are taken.
Additionally, some jurisdictions require parties bringing breach of warranty claims to provide notice of breach to the opposing party within a reasonable time of discovering the breach. UCC § 2-607. See, e.g, Hepper v Triple U Enterprises, Inc., 388 N.W.2d 525, 529 (S.D. 1986). This is intended to allow the other party to cure the breach. In other jurisdictions, filing the lawsuit itself satisfies this notice requirement. See, for example, Connick v Suzuki Motor Co., 675 N.E.2d 584, 590 (Ill. 1996).
2.6 Rules for Preservation of Evidence
Once parties "reasonably anticipate" becoming party to a U.S. litigation or the target of a governmental investigation, they have a common-law duty to preserve all potentially relevant hardcopy documents, electronically stored information (ESI), and tangible items that may be discoverable in the litigation or investigation. See Sedona Conference Commentary on Legal Holds: The Trigger & The Process (2018) (Public Comment Version).
This duty extends to all relevant materials created, modified, sent or received and to all persons in possession, custody or control of those materials, regardless of their geographic location. When assessing whether a potential litigation or government investigation meets the "reasonable anticipation" degree of likelihood, companies should consider the source and specificity of the threats or warnings, extent to which similar conduct has previously triggered litigation or investigation, pending litigation or investigations involving industry peers, commencement of a preemptive internal investigation, and whether the attorney work-product doctrine has already been invoked. If a credible argument can be made that litigation or an investigation is likely, it is best practice to implement a legal hold promptly.
In the product liability context, parties must also consider preservation of tangible things, and consideration should be given to what physical items may be relevant. This often includes the product alleged to be defective. For example, the Fourth Circuit upheld dismissal of a product liability case because the plaintiff breached his duty not to spoliate evidence and failed to preserve the vehicle at issue for the litigation. Silvestri v. GMC, 271 F.3d 583 (4th Cir. 2001).
2.7 Disclosure of Documents
There are broad rights to discovery in federal and state court. State rules and decisional law regarding the scope of discovery are often more expansive than the federal rules, and plaintiffs generally prefer to file actions in state court to take advantage of this difference. Because the initial pleadings require only basic facts, pretrial discovery allows plaintiffs to gather the facts needed to supplement each element of their claims.
Rules 26 and 34 of the Federal Rules of Civil Procedure govern the discovery process. Rule 26 sets forth the timeframe for discovery, including the timing of initial disclosures to opposing parties. Rule 26(a) initial disclosures are exchanged within 14 days of the 26(f) discovery conference before formal discovery begins. Initial disclosures include contact details for individuals with discoverable information, copies of documents used to support claims and defences, calculations of damages, and insurance coverage.
After initial disclosures, parties engage in discovery. Plaintiffs have the opportunity to conduct extensive discovery. Rule 34 governs document production, ESI, procedures for making requests, and the timeframe to respond to requests and make objections. Defendants can be required to produce emails, and, in some circumstances, text messages, of potential witnesses. This can include burdensome requests for design, manufacturing and sales records. There is also the ability to subpoena discovery of non-parties who may possess relevant information. A common example in a personal injury case would be subpoenaing the plaintiff’s medical records.
A party may object to a request, such as for protection of trade secrets or confidential information, and seek a protective order from the court. Parties can also bring motions to compel the production of certain documents or force the other party to produce a witness for depositions. Courts can punish parties who do not comply with discovery requests or engage in misconduct.
2.8 Expert Evidence
Rules 702 and 703 of the Federal Rules of Evidence govern expert witness testimony. For expert testimony to be admissible, Rule 702 requires that the expert’s scientific, technical or specialised knowledge assist the trier of fact understand the evidence or determine a fact at issue; that the testimony be based on sufficient facts or evidence; that the testimony be the product of reliable methods and principles; and that the expert reliably applied those methods and principles to the facts of the case. Under Rule 703, experts may base their opinions on either facts of which they were made aware or which they had personally observed. If experts in that specific field rely on certain types of data, that data need not be admissible for the opinion to be admitted.
Federal courts and around half of state courts use the Daubert standard. See, for example, In re Amendments to the Florida Evidence Code, No SC19-107 (Fla. May 23rd, 2019); State v. Coon, 974 P.2d 386 (Alaska 1999). Under Daubert, the trial judge acts as a gatekeeper and should admit expert testimony only if the Rule 702 requirements are met. Daubert v. Merrell Dow Pharm., Inc., 509 U.S. 579 (1993). Daubert also sets forth a non-exhaustive list of factors for courts to assess the reliability of an expert’s methodology: whether the theory is testable; whether the theory is subject to peer review and publication; whether there is a known or potential error rate; and whether the theory is generally accepted in the field. Courts typically also apply additional factors identified by the Ninth Circuit from Daubert on remand: "whether the experts are proposing to testify about matters growing naturally and directly out of research they have conducted independent of the litigation, or whether they have developed their opinions expressly for purposes of testifying because the former provides important, objective proof that the research comports with the dictates of good science." Daubert v. Merrell Dow Pharm., 43 F.3d 1311, 1313 (9th Cir. 1995). In addition to challenging methodology under Daubert, courts can review the experts’ conclusions in determining admissibility. Joiner v. G.E., 522 U.S. 136 (1997).
Around half of state courts have adopted the Frye standard. Under Frye, an expert’s testimony is admissible if the expert’s methodology is generally accepted by experts in that particular field. Frye v. United States, 293 F. 1013 (D.C. Cir. 1923). Methods that are in experimental stages or not well-recognised generally will not be admissible. While general acceptance is required under Frye, it is only a factor to consider for reliability under Daubert.
2.9 Burden of Proof
Plaintiffs bear the burden of proof for product liability cases. A plaintiff must prove each element by preponderance of evidence, which means the plaintiff’s evidence must show that each element is more likely than not. The defendant bears the burden on its defences, such as the claim being barred by the statute of limitations or the plaintiff misusing the product.
In some states, specifically for design defect cases, plaintiffs also have the burden of presenting a feasible, alternative design that is safer than the defendant’s design.
In some states, the burden can shift. For example, in California, the plaintiff has the initial burden of producing evidence that he or she was injured while the product was being used in an intended or reasonably foreseeable manner. If this burden is met, the burden of proof shifts to the defendant to prove that the plaintiff’s injury resulted from misuse of the product. See Perez v. VAS S.p.A. 188 Cal.App.4th 658, 678 (2010).
2.10 Courts in Which Claims are Brought
For the most part, juries decide product liability cases. If parties do not demand a jury trial, the entirety of the case will be decided by a judge. Even if a trial has a jury, a judge still has the power to rule on motions, including motions to exclude testimony, exclude evidence, dismiss the case, or grant summary judgment before trial if there are no genuine issues of material fact. If motions to dismiss and for summary judgment fail, the case will proceed to trial for either a judge or jury to decide its outcome.
Damages must have some basis and cannot be entirely speculative. There are ways for defendants to challenge exorbitant jury awards. Principles of due process limit awards that "shock the conscience." Rochin v. California, 342 U.S. 165 (1952). If a verdict does shock the conscience, such as if a judge sees the award as manifestly and grossly unjust, the judge can either force the plaintiff to take a lower-value verdict or retry the case. Some jurisdictions place caps on damages and, in particular, punitive damages. Principles of due process also limit punitive damages awards to, generally, a multiple of ten times compensatory damages. State Farm Mut. Auto. Insurance Co. v. Campbell, 538 U.S. 408 (2003).
Despite these limits, product liability verdicts can range in the millions or tens of millions for a single plaintiff. Currently, there are a number of cases on appeal where there are damages in the tens of millions. For example, a jury recently awarded USD55 million in compensatory damages and USD2 billion in punitive damages to a couple who allegedly developed cancer from Roundup weed killer. Pilliod v. Monsanto Co., No RG17862702 (Cal. Super. Ct. 2017). In a similar case, a jury awarded the plaintiff USD289 million, which the judge reduced to USD78 million. Johnson v. Monsanto Company, No 3:2016cv01244 (N.D. Cal. 2016). That verdict is being appealed. A third Roundup case resulted in an USD80 million jury verdict. Hardeman v. Monsanto Co., No 3:16-cv-00525 (N.D. Cal. 2016).
2.11 Appeal Mechanisms
In the federal court system, district courts serve as trial courts. Generally, a party may appeal a decision if it is final. A decision becomes final when the court formally enters a judgment. Fed. R. Civ. P. 58. There are some instances when a party may appeal the district court’s ruling before the trial has concluded. This is an interlocutory appeal. 28 U.S.C. § 1292.
If a party wishes to appeal a final decision, the party will appeal to the circuit court in which that district court sits. Instead of trying the case again, the appellate court will review the record. To challenge a circuit court’s ruling (or a state supreme court’s ruling if there is a federal question), a party can file a writ of certiorari to the U.S. Supreme Court to review the case, which grants a only a small number of these petitions. Generally, in a civil case, a party has 30 days to file a notice of appeal from the entry of judgment to a circuit court or 90 days to file a writ of certiorari to the U.S. Supreme Court. Fed. R. App. P. 4(a)(1)(A); Supreme Ct. R. 13.
In the state court system, states typically have trial, intermediate and supreme courts. After a trial court makes a decision, a party can appeal to the intermediate and then to supreme courts. The timeframes and procedures for appeals vary by state.
There are many affirmative defences in product liability actions. When a defence is affirmative, the burden of proof is on the defendants.
The most common defences are comparative and contributory negligence. Most states follow comparative negligence principles, which means that damages will be apportioned based on the parties’ fault. For example, if one defendant is 25 percent at fault, that defendant will be responsible for 25 percent of the damages. If the plaintiff is partially at fault, the plaintiff’s award will be reduced based on his or her percentage of fault. Some states employ a modified comparative negligence rule where plaintiffs are barred from recovery if they are more than 50 percent at fault. A small number of states follow the contributory negligence rule, which means that, even if the plaintiff is only 1 percent at fault, the plaintiff cannot recover at all. States may also have additional, special rules in this area. For example, in Michigan, a comparative negligence state, if the plaintiff’s percentage of fault is greater than the defendant(s), the economic award is reduced by that percentage of fault and the plaintiff cannot recover for non-economic damages. MCL § 600.2959; David Yates, "Defenses to Product Liability Claims" (Apr. 4, 2019). Some states preclude the comparative negligence defence in strict liability actions unless the defendant shows that the plaintiff voluntarily and unreasonably proceeded against a known danger. Restatement (Second) of Torts § 402A. For example, Pennsylvania precludes negligence as a defence to strict liability or a way to reduce damages but allows evidence of the plaintiff’s negligence (such as misuse of the product) in the causation analysis. Dodson v. Beijing Capital Tire Co., No 3:14-CV-01358, 2017 U.S. Dist. LEXIS 158484, at *11 (M.D. Pa. Sept. 27, 2017); Madonna v. Harley Davidson, Inc., 708 A.2d 507, 508 (Pa. Super. Ct. 1998).
Other defences include:
2.13 Regulatory Compliance
Generally, compliance with regulatory regulation does not prevent a finding of negligence when reasonable measures would suggest additional precautions. Restatement (Second) Of Torts § 288. Conversely, failure to comply with regulations can be evidence of breach of duty or negligence per se.
Regulatory compliance can be relevant to rebut a claim of exemplary or punitive damages. While meeting the regulations is not always a defence, compliance is a factor in determining whether the product is defective.
Courts may be more likely to consider compliance as a defence when the particular statute or regulation is recent, the standard specifically addresses the same issue as the case, and the court is "confident that the deliberative process by which the safety standard was established was full, fair, and thorough and reflected substantial expertise." Restatement (Third) of Torts: Product Liability § 4 cmt. e; see also Robert L. Rabin, Symposium: Regulatory Compliance As A Defense To Products Liability: Keynote Paper Reassessing Regulatory Compliance, 88 Geo. L.J. 2049, 2051 (July 2000).
2.14 Rules for Payment of Costs
Under the American Rule of litigation, each party bears its own legal costs. There are circumstances when costs of litigation (including experts) can be recoverable. For example, there are provisions of "offers of judgment" under the federal rules. Under Federal Rule of Civil Procedure 68, a party defending the claim can make an offer to the other party at least 14 days before trial. If the other party rejects the offer and the final judgment is less favourable than the offer, the other party must pay the costs incurred after the offer.
State courts have similar rules. In California, any party may make an offer to the other party not less than ten days before trial. If the offer is rejected, and the party rejecting the offer gets a less favourable award, that party is responsible for costs. California C.C.P. § 998.
If a party is successful at summary judgment or trial, certain costs (but not attorney fees) can be recovered. Fed. R. Civ. P. 54. A successful party may also make a motion to claim attorney fees and non-taxable expenses, unless the substantive law in that area requires that those fees be proved at trial as part of damages.
2.15 Funding Availability
Third-party litigation financing - arrangements through which non-parties provide financing in exchange for a portion of the ultimate proceeds - is a growing, multi-billion-dollar industry in the US. However, some states prohibit third-party financing arrangements under common law or statutory bans against champerty (an uninterested non-party’s funding of a lawsuit to share in the proceeds).
Contingency fee arrangements are common and virtually the exclusive means for compensation in personal injury cases. In these arrangements, plaintiffs’ counsel generally receives no fee if there is no recovery.
2.16 Class Actions, Representative Proceedings or Co-ordinated Proceedings
Class actions are available under Federal Rule of Civil Procedure 23 if certain prerequisites are met: (i) the class is so numerous that joinder is impracticable; (ii) the class presents common questions of law and fact; (iii) the class representative’s claims or defences are typical of the class’s claims and defences; and (iv) the representative will fairly and adequately protect the class’s interests. Fed. R. Civ. P. 23(a). Additionally, there are three types of classes, which have unique requirements: (i) limited fund actions, where prosecuting individual actions would create a risk of inconsistent adjudications or would impair the abilities of others to protect their interests, (ii) classes seeking injunctive relief, or (iii) classes seeking monetary damages. Fed. R. Civ. P. 23(b). As one example, in a class seeking a monetary remedy, common questions of law or fact must predominate over questions affecting individual members. Fed. R. Civ. P. 23(b). States generally have similar requirements. Although class actions are available, product liability and personal injury litigation is not generally susceptible to class action treatment because individualised assessments of causation and injury make it difficult to satisfy the federal and state prerequisites and requirements. See, for example, Amchem Prods., Inc. v. Windsor, 521 U.S. 591 (1997) (finding predominance and adequacy of representation not met for a class of hundreds of thousands of individuals that were, or may become, affected by asbestos exposure due to products manufactured by one or more of 20 different companies).
Multi-district litigation (MDL) allows for co-ordinated discovery and pretrial proceedings in complex civil cases brought in federal courts. To qualify for MDL, the cases must involve at least one common factual question. 28 U.S.C. § 1407. As discussed below, MDL actions are common for product liability actions in the US. Additionally, individual state courts may permit consolidated proceedings involving one particular product with similar claims of defects. See, for example, California’s Judicial Counsel, which oversees co-ordination of civil actions involving common factual or legal questions.
2.17 Significant Recent Cases
There have been notable developments in product liability law arising from pre-emption. In Pliva v. Mensing, 564 U.S. 604 (2011), the U.S. Supreme Court held that federal regulations governing generic manufacturers pre-empt state failure-to-warn claims. In the wake of Pliva, some states have adopted an innovator liability theory, which allows plaintiffs to hold brand-name manufacturers liable for injuries caused by a generic drug. See, for example, T.H. v. Novartis Pharm. Corp., 407 P.3d 18 (Cal. 2017); Rafferty v Merck & Co., 92 N.E.3d 1205 (Mass. 2018). However, the majority of courts to consider the theory have rejected it. See, for example, Fullington v. PLIVA, Inc., 720 F.3d 739, 744 (8th Cir. 2013); PLIVA, Inc. v. Dement, 780 S.E.2d 735 (Ga. App. 2015). More recently, in Merck Sharpe & Dohme Corp. v. Albrecht, No 17-290 (May 20, 2019), the U.S. Supreme Court found that whether a failure-to-warn claim is pre-empted is a question of law to be decided by a judge.
The GM ignition-switch litigation addresses the relationship between bankruptcy and product liability law. In Elliott v. General Motors LLC, 829 F.3d 135 (2d Cir. 2016), General Motors Corporation (Old GM) petitioned for bankruptcy, and General Motors LLC (New GM) was formed after purchasing Old GM’s assets "free and clear" (ie, free of all claims and other interests, including successor liability, other than expressly assumed liabilities). Thereafter, New GM recalled cars containing an ignition switch defect, which were manufactured by Old GM before the bankruptcy proceedings and sale, and about which Old GM did not provide notice to consumers. A class action was filed against New GM for injuries caused by the defect, and the plaintiffs argued New GM was liable under a successor liability theory. The Second Circuit Court of Appeals found that some claims could proceed against New GM because the plaintiffs received inadequate notice of the proposed sale and precluding their claims would violate due process. New GM tried to appeal, but its petition for writ of certiorari was denied by the U.S. Supreme Court. Gen. Motors v. Elliott, 137 S. Ct. 1813 (2017).
Large punitive damages awards have been drawing attention. In State Farm Mutual Automobile Insurance Co. v. Campbell, 538 U.S. 408, 414-15 (2003), the jury awarded USD2.6 million in compensatory damages and USD145 million in punitive damages. The U.S. Supreme Court found the punitive damages award violated the Due Process Clause of the Fourteenth Amendment, which prohibits excessive or arbitrary punishments. State Farm has since been applied by appellate courts to reduce or reverse significant punitive damages awards.
3. Product Law Policy
3.1 Policy Trends
The opioid litigation has state and local governments bringing new types of claims, seeking reimbursement for the health costs arising from use of a product. This follows a model first built in the context of tobacco-promotion litigation. Specifically, these governmental plaintiffs allege opioid manufacturers misrepresented the risks of long-term opioid use and aggressively marketed their products, and distributors failed to monitor suspicious orders of prescription opioids, thus contributing to the opioid epidemic. They bring claims ranging from negligence to public nuisance to violations of federal and state racketeering statutes.
Multi-district litigation continues to grow, accounting for approximately 50 percent of all cases in federal courts, and with almost 30 percent of pending MDLs in 2018 involving product liability. This trend toward co-ordination of cases has resulted in questions about whether the processes provided in MDLs are sufficient to address the mass of litigation. How to provide fairness in the MDL process has attracted legislative and rule-making attention.
Due to the high volume of documents in discovery, the 2015 amendments to the Federal Rules of Civil Procedure attempted to streamline the discovery process and alleviate the costs of unreasonably burdensome production requests. The amendments focus on "proportionality" by requiring discovery to be proportional to the needs of the case. Courts must further limit discovery if it is too burdensome, cumulative or duplicative. Fed. R. Civ. P. 26(b)(1), (b)(2)(C). Additionally, because of the expense and time involved in producing ESI, the amended rules restrict ESI discovery that is "not reasonably accessible" because of burden or cost. Fed. R. Civ. P. 26(b)(2)(B). Individual states are also starting to address issues concerning the need for discovery limits and have implemented rules that minimise this burden. For example, Illinois shares the emphasis on proportionality. Ill. R. Civ. P. 201(c)(3).
Finally, another notable procedural development comes from Bristol-Myers Squibb Co. v. Superior Court of California, 137 S. Ct. 1773 (2017), which clarified the scope of specific jurisdiction, and prevents plaintiffs’ lawyers from aggregating plaintiffs with no connection to a state into one multi-plaintiff filing in plaintiff-friendly jurisdictions.
3.2 Future Policy
Machine law, artificial intelligence, the internet of things and automated vehicles will be a major focus of future policies, legislation and regulations. Two illustrative examples are regulatory guidance on digital health and automated vehicle safety.
FDA has developed a Digital Health Program and has been examining digital health topics such as wireless medical devices, mobile medical apps, software as a medical device and cybersecurity. FDA has also issued a Digital Health Innovation Plan, available at https://www.fda.gov/media/106331/download, to encourage digital advances and ensure public safety. The Plan observes that FDA’s traditional approach to medical devices may not be appropriate for software-based technologies and describes FDA’s plan to redesign its policies and processes.
Likewise, the U.S. Department of Transportation (DOT), of which NHTSA is a part, has issued guidance concerning technological developments in transportation, specifically, automated vehicles. Among other documents, DOT issued an October 2018 report, "Preparing for the Future of Transportation: Automated Vehicle 3.0," available at https://www.transportation.gov/sites/dot.gov/files/docs/policy-initiatives/automated-vehicles/320711/preparing-future-transportation-automated-vehicle-30.pdf. The report notes DOT’s goals of ensuring safety and encouraging innovation and sets forth strategies for implementing and understanding automation.
An important question that will need to be addressed in future product liability cases is how to treat software for 3D printing. Historically, software has been considered a service, as opposed to a product. Thus, under traditional product liability principles, safety issues associated with software would not give rise to strict liability. Whether those traditional principles will continue to govern remains to be seen, but will have to be sorted out in future litigation, as software becomes more prevalent in consumers’ lives.
The material in this publication was created as of the date set forth above and is based on laws, court decisions, administrative rulings and congressional materials that existed at that time, and should not be construed as legal advice or legal opinions on specific facts. The information in this publication is not intended to create, and the transmission and receipt of it does not constitute, a lawyer-client relationship.